Skip to content

Full catalogue

204 finishes.
Filter to yours.

Both divisions in one place. Search by product, application or finish code. Every count below reflects what is physically in the Ras Al Khor warehouse.

18 ranges · 204 finishes

SPC Flooring
Materials34 finishes

SPC Flooring

100% waterproof rigid-core planks

Stone Plastic Composite planks built on a rigid limestone core. Completely waterproof, dimensionally stable in UAE heat, and finished with a wear layer that shrugs off scratches, dents and daily foot traffic.

View range
SPC Herringbone
MaterialsComing soon

SPC Herringbone

Classic parquet geometry, modern core

The timeless herringbone lay-up rendered in a rigid SPC core: the drama of parquet with none of the maintenance of real timber.

View range
Bamboo Flooring
MaterialsComing soon

Bamboo Flooring

Rapidly renewable, strand-woven strength

Strand-woven bamboo delivers hardness rivalling tropical hardwoods while regrowing in a fraction of the time. A genuinely sustainable hard floor.

View range
Wood Flooring
MaterialsComing soon

Wood Flooring

Engineered timber, honestly grained

Engineered hardwood with a real timber wear layer over a stable multi-ply base: authentic grain and warmth, engineered to resist movement.

View range
Decking Floor
MaterialsComing soon

Decking Floor

Outdoor boards that survive the summer

WPC decking boards engineered for terraces, poolsides and balconies. UV-stable, splinter-free and unbothered by moisture.

View range
Deck Tiles
MaterialsComing soon

Deck Tiles

Interlocking terraces in an afternoon

Snap-together deck tiles on a moulded base. No adhesives, no substructure. Lay them straight over concrete, tile or roof terraces.

View range
WPC Co-Extrusion Wall Panel
Materials4 finishes

WPC Co-Extrusion Wall Panel

Sealed-skin panels for demanding walls

A co-extruded polymer skin is fused over the WPC core in a single pass, sealing the board against moisture, staining and UV fade. It outlasts standard WPC in wet rooms, facades and high-traffic corridors.

View range
WPC Wall Panel
Materials59 finishes

WPC Wall Panel

The widest finish library we stock

Our deepest range: fluted, grooved and flat WPC boards across timber, stone, marble and solid tones. Lightweight, easy to cut on site, and fixed with clips or adhesive over almost any substrate.

View range
Bamboo Wall Panel
Materials6 finishes

Bamboo Wall Panel

400mm charcoal-bamboo boards

Bamboo-charcoal composite panels in a 400mm width, blending natural fibre warmth with the stability of a composite board. Low-VOC and naturally odour-absorbing.

View range
Profile Accessories
Materials7 finishes

Profile Accessories

Trims that finish the job properly

Matching corner profiles, end caps and joining trims in the same finishes as our wall panels. The difference between a panel installation that looks fitted and one that looks finished.

View range
3D Wall Panel
Decor & Interior8 finishes

3D Wall Panel

Sculpted relief that reads as architecture

Deep-relief panels that turn a flat wall into a light-and-shadow feature. Paintable, lightweight and seamless across large runs.

View range
PU Molding
Decor & Interior5 finishes

PU Molding

Crown, cornice and trim in polyurethane

High-density polyurethane mouldings with the detail of plaster cornice at a fraction of the weight. Won't crack, warp or absorb moisture, and installs with adhesive alone.

View range
Flexible Stone
Decor & Interior12 finishes

Flexible Stone

Real mineral surface that bends

A genuine stone mineral layer on a flexible backing. Thin enough to wrap columns and curved walls, light enough to fix with adhesive, and authentic enough to read as quarried stone.

View range
PU Stone
Decor & Interior6 finishes

PU Stone

Cast stone cladding without the mass

Polyurethane stone panels cast from real rock faces. You get quarried texture and depth on walls that could never carry the load of natural stone cladding.

View range
UV Shiny Sheet
Decor & Interior35 finishes

UV Shiny Sheet

High-gloss boards, mirror flat

UV-cured high-gloss sheets in marble, timber and solid colours. The cured coating gives a hard, mirror-flat surface that wipes clean and resists yellowing.

View range
UV Matt
Decor & Interior6 finishes

UV Matt

Soft-touch matt, zero glare

The matt counterpart to our gloss range. A soft, anti-glare surface with a subtle tactile feel. It is the finish specifiers reach for in bedrooms, boardrooms and hospitality interiors.

View range
WPC Ceiling Tube
Decor & Interior10 finishes

WPC Ceiling Tube

Linear baffle ceilings, 50×90×2900 mm

Hollow WPC tubes suspended as linear ceiling baffles. They add rhythm and acoustic softening overhead while hiding services in the plenum above.

View range
WPC Timber Tube
Decor & Interior12 finishes

WPC Timber Tube

Vertical screens and slat partitions

The same hollow WPC section used vertically: as room dividers, screening to columns, or slatted partitions that filter light without closing a space off.

View range